Paul

Ran both tests with driver flags as requested. Same result with or without flags. Nothing additional in the log file between any debug test. No .inv file created, the test was stopped after 2 hours. Again, I cannot supply the log files. I downgraded to TNI v5 as we run this on several networks, scan finished on one machine or across the entire network in under 2 minutes with full results. In the TNI v5 log file, Computer Systems scan time was around 700ms as opposed to 51,670,140ms with TNI v6.

Ran a command prompt debug on a second machine with the same result, hanging for 14 hours on "Computer System" then progresses to finish the scan. I ran a GUI test scan after changing the timeout parameter to 180 minutes. The scan failed at the expected 3.5 hours. I am running another GUI test scan after changing the timeout parameter to 900 minutes (15 hours) to see if the scan will finish without running debug from command prompt, as that is the only time it finishes a scan at this point.

The 50% point where the application hangs for 14 hours is listing "Computer System" as the task running.

I ran debug, tniwinagent debug -v, in command prompt on Thursday and let it run over the weekend, Normally a scan would seem to hang at 50% then eventually fail with SMB connection lost. After running debug, the log shows that that scan finished and the 50% point, took 51670140ms (14 hours) to complete and move on. I cannot send the logs from the system on which TNI is running. I am assuming the non-response setting is hitting the max, default is 30 minutes, then killing the scan. It happens on all windows nodes

I have been attempting to get a TNI scan completed with no luck. v6.0 SMB makes the connection, installs the agent, scans hardware, starts scanning software, the scan gets to 50% (scanning software) and stops. This lasts for about an hour before failing stating SMB connection lost. I have run the program just by double clicking it, runas administrator, as a domain admin, local admin, with debug on, run the tniwinagent /debug. After running debug, the log only states, Starting making local scan Error loading UninstITL