Jump to content

cisco switch login


Recommended Posts

hi,

 

 

Task (2 / 596) Status
-------------- ----------------------------------------------------------------------
10.0.xx.xx Scan failed: SSH: {seNoError}; VMWARE: Port open, but protocol skipped
 
user name and password correct too but if i`am do new connection from putty need to accept the protocol. Can be this problem when TNI try`s login?
 
 
 
post-13913-0-67888700-1599810026_thumb.jpg

 

 

snmp 

 

Task (4 / 1276) Status
--------------- -----------------------------------------------------------------------------------------------------------------------------------------------------------
    10.0.99.40 Scan failed: SNMP: Incorrect v1/v2 communities, but v3 protocol is available; SSH: Port open, but protocol skipped; VMWARE: Port open, but protocol skipped
 
Community for read is OK from cacti i can read V1 or V2 but from TNI no 

post-13913-0-67888700-1599810026_thumb.jpg

Link to comment

Hi, cestarik.

Thanks for your message.

 

SSH:

There should be no problem with the Security alert message. TNI accepts it automatically. The problem may be related to the shell of the OS that you are trying to scan or the scanning agent.

Please try to scan this system manually. You can find instructions on how to do this here:

https://docs.softinventive.com/tni/user-manual/scanning-using-agents/manual-scan

Let us know if the local scan returns the same error.

SNMP:

First of all, please check if the name of the community is specified correctly in the SNMP column. There may be a typo.
It is also possible that access to some OIDs of the remote device is restricted. In this case, you will receive the same error "Incorrect v1/v2 communities", and TNI will not be able to collect other OIDs and perform an SNMPwalk.

Link to comment

hi

 

still problem with snmp. community looks like this  Tr4Ps.2020 and is version 2c

 

 

Task (38 / 1725) Status
---------------- -----------------------------------------------------------------------------------------------------------------------------------------------------------
    Done
    Scan failed: SNMP: Incorrect v1/v2 communities, but v3 protocol is available; SSH: Port open, but protocol skipped; TELNET: Port open, but protocol skipped
 
 
cisco 3750E
 
 
 
    
Link to comment

Thank you for the information.

 

There is one more thing that we can try.

 

Please close the program and temporarily remove the netsnmp.dll file from the TNI installation folder (move it to another folder). Start the program and try scanning this switch.

Let us know the result.

Link to comment

Thank you for the information.

 

There is one more thing that we can try.

 

Please close the program and temporarily remove the netsnmp.dll file from the TNI installation folder (move it to another folder). Start the program and try scanning this switch.

Let us know the result.

 

 

 

Task (8 / 1327) Status
--------------- ---------------------------------------------------------------------------------------------------------------------
               Scan failed: SNMP: System scan failure; SSH: Port open, but protocol skipped; VMWARE: Port open, but protocol skipped
Link to comment

We apologize for the delay.

 

Please restore the netsnmp.dll file. Check the following:

 

1. Once again, make sure that you are using the Tr4Ps.2020 community when you scan this device.

2. Make sure that the UPD 161 port is not blocked by Windows on the system where TNI is installed.

3. Since SNMP v1 and v2 utilize the UPD protocol, it is possible that some packets are lost in your network. Please try to ping this switch using the ping -t command. Let us know the percentage of the packet loss.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...